Apex-Milling Machine Vice Deluxe Swivel Model 745
Product Description:
- Tilt Lock Machine Vice design is be a like with two vertical and horizontal rails connected to the base.
- You can hold piece parts in the most immobile state possible.
- Three Basics in precision Clamping
- That the movable jaw does not lift off the bed.
- That the body is rigid, and that a minimal amount of bending stresses is created in the clamping area.
- That deflection of the stationary jaw is minimized.
- Totally enclosed toughened Screw.
- The bed is guaranteed flat and parallel .0001 per inch.
- Graded Cast Iron dully stresses the relieved body. Tool steel hardened & ground Jaws.
- In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
- 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
| RANGE | 4 Inches | 6 Inches | 8 Inches |
| Width of Jaws (In mm) |
100 | 60 | 45 |
| Opening of Jaws (In mm) |
125 | 90 | 70 |
| Depth Of Jaws (In mm) |
150 | 125 | 75 |
|
Length Overall (In mm) |
325 |
520 |
575 |
|
Height Overall (In mm) |
125 |
150 |
170 |
|
Width Overall (In mm) |
170 |
245 |
300 |
|
Tenon slot size (In mm) |
16 |
20 |
20 |
|
Weight In (Kgs) code |
18 |
47 |
80 |
Frequently Bought Together
Sold Out
Sold Out
