Apex-Milling Machine Vice Deluxe Plain Model 745P
Product Description:
- Tilt Lock Machine Vice design is be a like with two vertical and horizontal rails connected to the base.
- You can hold piece parts in the most immobile state possible.
- Three Basics in precision Clamping
- That the movable jaw does not lift off the bed.
- That the body is rigid, and that a minimal amount of bending stresses is created in the clamping area.
- That deflection of the stationary jaw is minimized.
- Totally enclosed toughened Screw.
- The bed is guaranteed flat and parallel .0001 per inch.
- Graded Cast Iron dully stresses the relieved body. Tool steel hardened & ground Jaws.
- In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
- 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
|
RANGE |
4 Inches |
5 Inches |
6 Inches |
|
Width of Jaws (In mm) |
100 |
150 |
200 |
|
Opening of Jaws (In mm) |
100 |
150 |
200 |
|
Depth of Jaws (In mm) |
48 |
60 |
65 |
|
Length Overall (In mm) |
325 |
520 |
575 |
|
Height Overall (In mm) |
90 |
115 | 130 |
|
Width Overall (In mm) |
160 | 225 | 275 |
|
Tenon slot size (In mm) |
16 | 20 | 20 |
| Weigth In (Kgs) |
12 | 34 | 60 |
Frequently Bought Together
Sold Out
